The Birthing Process

The Baby takes its first look at the Big Wide World

Bit by Bit it moves further Outside , But things are getting Tight !

Looks like the Clearance to the roller door is OK , but the Outer  Cladding is getting very close

Very Very close , now down to  6mm ( 1/4 inch ) clearance  !!!

If this Baby gets Stuck ! ,there's going to be tears !  (  alas  Mine ! )

Further out now , but still only millimeters to spare

And then all with a Rush , it bursts forth into the World !!

Bit of a Stumpy Baby this one , as is only 1/4 grown

This side looks a little strange as the Dual skin and the fiberglass don't go all the way
to the gunwales , this is because there is more Boat to build on top of this Piece ( Jigsaw 's
Pieces go Horizontal and Vertical, like any Jigsaw ) and this allows an overlap of the Skin from
the other Sections so as not to concentrate all the breaks in the skin at a single point . The other side doesn't have this problem due to the Wingdeck section between the Hulls .